Ways to increase the service life of disabled lifts:
1. We can’t use strange force when using the elevator for the disabled, which will cause certain damage to the machinery and equipment. The second is to carry out maintenance on the elevator machinery and equipment for the disabled on time, which can increase the service life of the elevator for the disabled.
2. It is necessary to reasonably prevent the impact load: it is necessary to strictly abide by the safety operation regulations; The opening and closing of hydraulic solenoid valve shall not be too fast; Prevent obvious collision caused by fitness movement of prefabricated components of equipment to the extreme position during work; Hydraulic press with no impact effect disabled elevator machinery and equipment can not use the working equipment to strongly impact the working target so as to achieve the goal of crushing.
3. Check the oil product and oil quantity of the gear oil to make sure that the oil product meets the requirements. If the oil product of the lifting platform is sticky or has dirt, it shall be removed and replaced immediately. Ensure that the oil volume is at the required position, and then check the hydraulic oil pipe and connector of the lifting platform to ensure that the hydraulic oil pipe and connector are normal without damage.
4. The maintenance of driving force components must also be carried out in the same spacing and manner as cars. Oil pipelines, pipelines and filtering devices. The pipeline shall not be damaged and the connector shall not be loose. Be sure to tighten all connectors. Remove and disassemble the lowering valve of the mobile hydraulic platform lift, blow out the plunger pump with air compression, then install it and install it again. Drain and discard the gear oil, tighten the connector, remove the oil filter, clean it with air compression after washing, and then put it back into the automobile oil tank and connect the pipeline.
5. The disabled elevator operator shall keep the elevator for a long time. As the random gap of the control system software of each machine and equipment is different, the damage level of the connection position is different, so the gap is also different, and the output of the diesel engine and the hydraulic transmission system is also different. This element gives the individualization of the machine and equipment.
The above is a detailed introduction to the common problems in the application of lifts for the disabled and the ways to increase the service life. In order to better ensure that this lift for the disabled can show long-term service items to the disabled, it must be applied in accordance with the above detailed introduction in the whole process of application, so that the service life can be increased.
